What Does TapXR’s Haptic (Vibration) Feedback Mean?

Your TapXR has haptic (vibration) feedback to provide you with more information.

• On Startup: Your Tap will vibrate 1-3 times when powering on. The number of vibrations indicates the battery level. Each buzz represents 33% of the remaining battery.
• On Power Down: When turning off your Tap it will have one vibration. This indicates the device has powered down.
• Auto Sleep: If you do not use Tap for 2 minutes, it will enter into sleep mode and vibrate once.
• Switch Mode: When entering into SWITCH mode (ooxxx), you will feel a very short vibration to indicate the mode was entered correctly. You will also feel a short vibration when exiting switch mode.
• Shift: When turning shift on (xxxoo), you will feel a very short vibration to indicate the mode was entered correctly. You will also feel a short vibration when exiting shift mode.
• Custom Mappings: When entering into your custom TapMap (switch then xoxxx), you will feel a very short vibration to indicate the map was entered correctly. You will also feel a short vibration when exiting your map.
• Multi-Tap: When performing a double or triple tap, you will feel a very short vibration to confirm that you have performed a multi-tap.

Long Vibration (7-10 seconds): If you are experiencing a long haptic when powering your Tap on, your device's firmware installation was interrupted. Please wait for the TapXR to power on after the long buzz, go to TapManager and complete the installation. If the problem persists, please contact us directly using support@tapwithus.com.